Smashpot V2 Replacement Parts

Top Caps & Foot Studs 
Swapping your Smashpot to another fork model? You'll need the right top cap for that fork.
Note that Topcaps are compatible between Smashpot V1 and V2 for Fox, Ohlins and DVO topcaps.
Rockshox Topcaps are NOT cross-compatible between Smashpot V1/V2.
Footstuds of all types are not cross-compatible between Smashpot V1 and V2.

If you're changing between fork brands, you'll also need the appropriate foot stud. See this checklist: https://www.vorsprungsuspension.com/blogs/news/transfer-your-smashpot-to-another-fork-parts-required

Make sure to consult the installation manual for the fork you're installing it in - the process varies slightly between forks.

Cartridge Tube Heat Shrink  
Required for changing travel of the Smashpot kit.

Travel Adjust kit 
Includes top-out travel spacers and spring travel spacers required for changing travel if you do not have the original parts.

Coil Spring Spare Heat Shrink
Use this to freshen up the heat shrink on your coil spring. 

Spring Isolator Kit - Universal
This 2-piece isolator system helps keep your spring quiet and your stanchions protected internally. Included in all Smashpot springs (and complete kits) as of December 2022, and is retrofittable to older kits. Can be used in all forks instead of the older style spring perch. Replaces the PVC liner previously used in the Rockshox Zeb and Fox 38 kits. Refer to the installation manual for more details.

Secondary Spring kit - Universal
Secondary spring kits are now available in 2 different stifnesses so you can tune your starting spring rate when using 2 springs (180mm travel options and above). Both options (Medium and Firm) have a stiffer spring rate than the secondary spring that shipped untill 28th March 2025. Both these springs are now packaged with each top cap kit from forks that are designed around 180mm travel or more.